Features

  • Four microphone channels with rear mounted combi XLR / jack socket inputs (balanced or unbalanced)
  • Each microphone channel has its own Volume, Bass, Mid, Treble, Reverb, mute switch and LED status indicator
  • Three stereo line level auxiliary inputs with rear mounted phono (RCA) sockets
  • Three 60mm slider level controls with shared Bass, Mid & Treble tone controls
  • 24 Bit Digital Signal Processor (DSP) with push switch selection of 12 different effects
    Variable Delay and Level can be applied to any effect - (equivalent to 120 presets)
  • The PPI LED shows if DSP drive level is too high so input drive can be reduced
  • A footswitch can be used to switch the DSP on or off manually
  • Auto, if selected, will detect the music level on any aux input and automatically mutes the reverb without the need to return to the footswitch
    An LED indicates the muted status
  • Master rotary level controls for CH A, CH B and Monitor. A stereo / mono push switch is also included
  • Speaker outputs on rear mounted Speakon sockets

Specifications

  • Power Output (RMS) @ 1kHz
    - Head & Console Models
    KD2 500 - 250 + 250 watts RMS into 4 ohms
    KD2 1000 - 500 + 500 watts RMS into 4 ohms
    KD2 1300 - 650 + 650 watts RMS into 4 ohms
    - Gigbox Combo Models
    KD2 750 - 250 + 250 watts RMS into 4 ohms,
    175 watts internal monitor speaker from third amplifier
    KD2 1500 - 500 + 500 watts RMS into 4 ohms,
    350 watts internal monitor speaker from third amplifier
    70% into 8 ohms
  • Microphone inputs: Balanced or unbalanced 3k3 - 5mV
  • Line level inputs: Unbalanced >22k - 200mV
  • Slave line output: Unbalanced <10k - 775mV (0dB)
  • Headroom: +22dB (PPI’s active @ +19dB)
  • Bass EQ: +/- 15dB @ 50Hz - Shelved
  • Mid EQ: +/- 8dB @ 2k5Hz
  • Treble EQ: +/- 15dB @ 12kHz - Shelved
  • Frequency response: 20Hz – 25kHz +/-0.5dB
  • D/C Protection: +/-32V
  • Signal to noise ratio: Better than 100dB
  • Clip Limiter: Active clip limiting (Internal variable threshold)
  • T.H.D. @ 1kHz rated power – <0.02%
  • Damping Factor: Better than 400
  • Slew Rate: 40V / uS
  • Mains Input Power: 230V +/-10% 50-60Hz

Options, Dimensions & Weights

- KD2 500 Head - 250 + 250 Watts RMS into 4 ohms

Width: 530MM | Depth: 340MM | Height: 126MM | Weight: 11.7KG

- KD2 1000 Head - 500 + 500 Watts RMS into 4 ohms

Width: 530MM | Depth: 340MM | Height: 126MM | Weight: 12.7KG

- KD2 1300 Head - 650 + 650 Watts RMS into 4 ohms

Width: 530MM | Depth: 340MM | Height: 126MM | Weight: 13.7KG


- KD2 500 Console - 250 + 250 Watts RMS into 4 ohms

Width: 530MM | Depth: 435MM | Height: 148MM | Weight: 14.6KG

- KD2 1000 Console - 500 + 500 Watts RMS into 4 ohms

Width: 530MM | Depth: 435MM | Height: 148MM | Weight: 15.6KG

- KD2 1300 Console - 650 + 650 Watts RMS into 4 ohms

Width: 530MM | Depth: 435MM | Height: 148MM | Weight: 16.6KG


- KD2 750 Gigbox - 250 + 250 Watts RMS into 4 ohms
+ 175 Watts RMS into 8 ohms internal monitor speaker

Width: 515MM | Depth: 340MM | Height: 400MM | Weight: 21.9KG

- KD2 1500 Gigbox - 500 + 500 Watts RMS into 4 ohms
+ 350 Watts RMS into 8 ohms internal monitor speaker

Width: 515MM | Depth: 340MM | Height: 400MM | Weight: 22.9KG


Product Rear Photo Options: